HOME   GALLERY   REFERENCE   RESOURCES   CONTACT   
 skygrazer.com —> Polymer Clay —> Gallery —> Vessels —> Meadow Votive      [Prev]  [Top]  [Next]  
 
polymer clay rabbit transfer votive
turtle image transfer votive chipmunk image transfer candle holder
  

Meadow Animals Votive

Dimensions: Height=3"  

This votive candle holder has three animal image tranfers on it. The images were photocopies, colored in with colored pencils. I rolled out a thin sheet of translucent clay, laid the images on it, and pressed them down well. After awhile, I took the paper off and the images were on the clay.

I then carefully cut out the image transfers and laid them on the glass votive. I used pieces from the same sheet to patch around the transfers. Once the candle holder was baked, I used some Future to protect the images from being scratched off during normal use.

 
Home | Gallery | Reference | Resources | Contact
 
Rev: Mar 15, 2009    Home: www.skygrazer.com/polymerclay
© 2001 Sky Grazer Designs. All Rights Reserved.
Comments or suggestions? Contact me.